Item No. 1 Bouffant Cap
| Name of Manufacturer | |
| Country of Origin | |
| Item type | Bouffant cap |
| Purpose | Protection from dirt |
| Item description | Single use disposable stretchable |
| Material used | Made of strong, light weight and breathable spun bonded polypropylene (SPP) fabric |
| Requirements | Dimensions
Relaxed 8” and stretched 21” for small and relaxed 8.5” and 24” in stretched condition |
| Color | Blue/white |
| Compliance/certification required | CE or USFDA |
Item No. 2: Particulate-filtering face piece respirator (N-95 or equivalent)
| Name of Manufacturer | |
| Country of Origin | |
| Item name | Particulate-filtering face piece respirator(N-95 or equivalent) |
| Purpose | Protection of mouth from pathogenic microbes |
| Type | Face piece respirator |
| Purpose | Protection from the Corona virus while in contact with COVID 19 cases |
| Requirements | Should have performance equivalent to filter performance at least ≥95%, flow rate 85 to 95L/min
Good breathability with design that does not collapse against the mouth (e.g. duckbill, cup shaped) |
| Equivalent standards | N95/KN95/FFP2 |
| Compliance/certification required | At least WHO COVID specification for face respirator and/CE/USFDA requirements |
Item No. 3 : Medical/surgical mask
| Name of Manufacturer | |
| Country of Origin | |
| Item | Medical/surgical mask |
| Purpose | Protection from bio hazard |
| Medical/surgical mask, high fluid resistance, good breathability, internal and external faces should be clearly identified, structured design that does not collapse against the mouth (e.g. duckbill, cup shaped)
Fluid resistance at minimum 120 mmHg pressure. |
|
| Filtration efficiency | ASTM F2101, EN14683 annex B, or equivalent |
| Breathability | MIL–M-36945C, EN 14683 annex C, or equivalent |
| Compliance/certification required | EN 14683 Type IIR performance ASTM F2100 level 2 or level 3 or equivalent; based on ASTM F1862-07, ISO 22609, or equivalent |
Item No. 4: Face shields/visor
| Name of Manufacturer | |
| Country of Origin | |
| Item name | Face shields/visor |
| Purpose | Protection of face including eye from microbial contamination |
| Material | Made of clear plastic and provides good visibility to both the wearer and the patient, |
| Requirements | Adjustable band to attach firmly around the head and fit snuggly against the forehead, Fog resistant (preferable), Completely cover the sides and length of the face, May be re-usable (made of robust material which can be cleaned and disinfected) or disposable. |
| Compliance/certification required | EU standard directive 86/686/EEC, EN 166/2002, ANSI/ISEA Z87.1-2010, or equivalent
|
Item No. 5 Goggles (reusable)
| Name of Manufacturer | |
| Country of Origin | |
| Item name | Safety Goggles |
| Purpose | Use for biohazard (Virus) protection |
| Requirements | Good seal with the skin of the face, Flexible PVC frame to easily fit with all face contours with even pressure, Enclose eyes and the surrounding areas,
Accommodate wearers with prescription glasses, Clear plastic lens with fog and scratch resistant treatments, Adjustable band to secure firmly so as not to become loose during clinical activity, Indirect venting to avoid fogging, |
| Type | Reusable after decontamination |
| Compliance/certification required | EU standard directive 86/686/EEC, EN 166/2002, ANSI/ISEA Z87.1-2010, or equivalent |
Item No. 6: Goggles (disposable)
| Name of Manufacturer | |
| Country of Origin | |
| Item name | Safety Goggles |
| Purpose | Use for biohazard (Virus) protection |
| Requirements | Good seal with the skin of the face, Flexible PVC frame to easily fit with all face contours with even pressure, Enclose eyes and the surrounding areas,
Accommodate wearers with prescription glasses, Clear plastic lens with fog and scratch resistant treatments, Adjustable band to secure firmly so as not to become loose during clinical activity, Indirect venting to avoid fogging, |
| Type | Disposable |
| Compliance/certification required | EU standard directive 86/686/EEC, EN 166/2002, ANSI/ISEA Z87.1-2010, or equivalent |
Item No. 7: Nitrile Gloves (Non-sterile)
| Name of Manufacturer | |
| Country of Origin | |
| Item name | Gloves, non-sterile |
| Purpose | Protection of hand from microbial contamination |
| Description | Comfortable, super soft flexible powder free nitrile gloves provide added safety applications.
|
| Requirements | Designed with special nitrile formulation and fit like latex and allow full range of motion and excellent flexibility to minimize stress and fatigue.
powder-free, Cuff length preferably reach mid-forearm (e.g. minimum 280mm total length. Should not contain natural rubber latex |
| Size | Different size |
| Compliance/certification required | EU standard directive 93/42/EEC Class I, EN 455, EU standard directive 89/686/EEC Category III, EN 374 ANSI/ISEA 105-2011, ASTM D6319-10 or equivalent |
Item No. 8: Biohazard bag
| Name of Manufacturer | |
| Country of Origin | |
| Item name | Biohazard bag |
| Purpose | Personnel protection from biohazard |
| Requirements | Disposal bag for bio-hazardous waste, 30x50cm, with “Biohazard” print, autoclavable polypropylene. Not less than micron thickness |
| Basic unit | One |
| Packing | Not more than 50 units per cartoon |
Item No. 9: Body bag (for dead body packing)
| Name of Manufacturer | |
| Country of Origin | |
| Item type | Body bag (for dead body packing) |
| Purpose | Infected dead body packing |
| Requirements | Made of linear enforced, U-shape zipper and 2 zipper pulls with tie ribs. Adult size 250x120cm Protector Body Bag specifications: 6 handles Impermeable, linear reinforced LLDPE, LDPE, EVA, PEVA, (avoid PVC), minimum thickness 400 microns; Should be able to hold 100-125 kilos (200-250 lbs), Should contain no chlorides: burning of chlorides pollute the environment and can cause damage to retort chambers.
Should be non-carcinogenic to health of funeral workers when used for cremations. At least 6 handles included in the body bag to allow burial team to hand carry it safely Heat-sealed: insure superior strength and safety, provide full containment of blood borne pathogens Cracking point of 25 – 32 degrees below zero |
| Shelf-life | Minimum 10 years |
| Color | White |
Item no. 10: Gown Level IV
| Name of Manufacturer | |
| Country of Origin | |
| Item name | Gown for COVID |
| Purpose | Virus protection barrier |
| Type | Blood borne pathogens penetration resistant: |
| Descriptions | Single use, fluid resistant, disposable, length mid-calf to cover the top of the boots, thumb/finger loops or elastic cuff to anchor sleeves in place. |
| Requirements | To be used in high risk situations which prevents all fluid penetration at least for up to 1 hour
Must have tested the barrier level barrier level performance |
| Color | Preferably light |
| Compliance/certification required | AAMI PB70 level 4 performance, or (EN 14126-B) and partial body protection ( EN 13034 or EN 14605), or equivalent |
Item No. 11: Reusable Gown (Coverall)
| Name of Manufacturer | |
| Country of Origin | |
| SN | Requirements |
| 1 | Heavy-duty apron Heavy-duty non-woven apron
|
| 2 | Straight apron with bib Fabric: 100% polyester with PVC coating, or 100% PVC, or 100% rubber, or other fluid-resistant material
|
| 3 | Waterproof, sewn strap for neck and back fastening
|
| 4 | Minimum basis weight: 300 g/m2 Covering size : approximately 70–90 cm width x 120–150 cm length |